Sun Microsystems Netra CP32x0 - Manual (Page 56)

4-2 Netra CP32x0 SAS Storage Advanced Rear Transition Module HD User’s Guide • January 2009
4.1 Specifications for the ARTM-HD
This section provides mechanical, electrical, environmental, and other relevant
specifications for the ARTM-HD.
4.1.1 Physical Dimensions
The ARTM-HD is a 6U (233.35 mm) height board with 80 mm in depth for standard
applications. It complies with IEEE 1101.11 mechanical standards, as required by the
PICMG 3.0 Revision 2.0 specification. The ARTM-HD is keyed to conform to the
PICMG 2.10, Keying of ATCA Boards and Backplanes specification.
4.1.2 Power Requirements
The power consumption of the ARTM-HD is limited to 25W maximum. The blade
server provides the following voltages: 3.3V Management Power and +12V Payload
Power. The ARTM-HD creates 3.3V, 5V, and 1.2V from the 12v Payload Power.
4.1.3 Electrical Requirements
The ARTM-HD is powered through the Netra ATCA node board. The blade server
provides the following voltages: 3.3V/
+12V.
4.1.4 Environmental Specifications and Compliance
For details on the environmental specifications and compliance, see Important Safety
Information for Sun Hardware Systems (816-7190), the Netra CP3220 Board User’s Guide
(820-1982).
You can download and view these documents from the following web site:
http://www.sun.com/documentation/