Standard Horizon MAX CPF180I - Manual (Page 95)

CPF180i and CPF300i Page 97
NOTE
The CPF180i has one NMEA input - Port 1. The AIS device will be connected to Port 1, so in step
5 setup Port 1 to AIS38400. Refer to Par. 2.4 for wire connections.The CPF300i has 3 NMEA input
connections any of which the AIS device may be connected to. Refer to Par. 2.4 for wire
connections.
14.3 QUICK INFO ON AIS TARGET
By placing the cursor over a AIS Target icon using the ShuttlePoint knob, the following
information is displayed:
· Vessel Name
· MMSI number
· Radio Call Sign
· SOG
· COG
· CPA and TCPA values
NOTE
The selected AIS Target icon is surrounded by a square frame when user places the cursor over
the icon.
14.4 AIS LIST
It is possible to show the AIS List page that show basic information of the Target ship with
the ability to select a Target ship and locate it on the chart. Follow the procedure:
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT].
2. Move the ShuttlePoint knob to highlight AIS LIST and press [ENT].
Figure 14.4 - AIS List page
3. Move the ShuttlePoint knob up or down to select the Target and scroll the page up or
down. Press [ENTER] exits the page and shows the Target ship on the Chart page along
with the current position of the GPS Chart Plotter.