Standard Horizon MAX CPF180I - Manual (Page 35)

CPF180i and CPF300i Page 37
Figure 3.5 - Language Selection menu on CP300
NOTE
If the selected language is not available on cartographic data, English language is used.
WARNING
If you have accidentally selected a language and are unable to select a language that is
understandable, perform the following procedure:
a. Select the Chart page.
b. Press [MENU] two times, move the Shuttlepoint knob to highlight the first (top) selection in the
menu and press [ENT].
c. A language window will be shown, press [ENT], select your language and press [ENT].
3.6 SELECTING PAGES USING SOFT KEYS ON CPF300i
The Soft Keys located under the LCD on the CPF300i are used to select the pages quickly
without the need to go into the menu. The default pages are VIDEO, NAV, HIGHWAY,
CELESTIAL, CHART and LIST.
When one of the Soft Keys is pressed popup windows above each Soft Key are shown with
the key description. Press the Soft Key with the desired page description and the GPS Chart
Plotter will change to that page.
WAAS 3D
WAAS 3D
WAAS 3D
CHART CELESTIAL HIGHWAY NAVIGATION
GPS STATUS NMEA DISPLAY Chart 200KHz Display example with RADAR connected
WAAS 3D
Figure 3.6 - Screen display pages
3.7 CUSTOMIZING THE SOFT KEYS ON CPF300i
The Soft Keys (CPF300i) can be individually customized from the default pages (discussed