Standard Horizon MAX CPF180I - Manual (Page 78)

Page 80 CPF180i and CPF300i
· TWD = True Wind Direction
· HDOP = Horizontal Diluition of Precision
· VDOP = Vertical Diluition of Precision
· Temp = Water Temperature
· TLOG = Trip Log
· DATE = Current Date
· TIME = Current Time
· VMG = Velocity Made Good
· ETA = Estimated Time of Arrival
· TRACKING = Tracking
· SCALE
= Chart Scale
· GSP Status = Shows GPS Fix Status (WAAS, 3D, 2D, ...)
To select the desired field, follow the procedure:
1. Press and hold [MENU] until a field is highlighted (it will be shown in a yellow frame).
2. Move the ShuttlePoint knob to the desired data field (the yellow frame is moved to the
desired data field) and press [ENT]. The popup window will be shown.
3. Move the ShuttlePoint knob up/down or left/right to choose the desired setting and press
[ENT].
4. Press [CLR] to store and exit the editing mode.
NOTE
Data window field on the NAVIGATION, HIGHWAY, GPS STATUS, and NMEA pages may be
customized in the above manner.
WAAS 3D
WAAS 3D
AAS 3D
Figure 12.0.1 - Customizing the Data Windows
12.0.2 Trip Log selection / Reset
When Trip Log is selected in one of the data windows and you want to reset the log:
1. Press and hold [MENU] until a field is highlighted (it will be shown in a yellow frame).
2. Move the ShuttlePoint knob to the Trip Log window and press [ENT].
3. A popup window will be shown.Move the ShuttlePoint knob to RESET and press [ENT].
4. A warning window will be shown to confirm. Move the ShuttlePoint knob to YES and
press [ENT].
5. Press [CLR] to store and exit the editing mode.