Tracks – Standard Horizon MAX CPF180I User Manual
Page 69
CPF180i and CPF300i
Page 71
10. TRACKS
The CPF180i and the CPF300i have the capability to store 20 individual tracks and record
up to 10000 Track Points.
Before using the Track function you will need to setup the Track function that suits your boat.
The Track function tracks your vessels location as it moves through the water. The Track
function can be setup to lay down a Track for a predetermined time or distance interval. If
you have a fast moving boat you may want to setup the CPF180i or CPF300i to record a
Track point every 0.5NM or if you have a sail boat you may want to setup to lay down a Track
point once every 1 minute.
NOTE
Please note the Track point memory capacity is 10,000 points. This means for a long journey you
may have to adjust the time or distance to be able to track your journey. It should be noted when the
10,000 Track points are used up, the first Track point layed down will be deleted when a new point
is placed on the chart.
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press
[ENT].
2. Move the ShuttlePoint knob to highlight TRACK and press [ENT].
3. Move the ShuttlePoint knob to highlight STEP UNIT and press [ENT] or move the
ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to highlight Dist or Time and press [ENT] or move the
ShuttlePoint knob to the right.
Figure 10 - Distance Units and Time Units
5. Move the ShuttlePoint knob to highlight DISTANCE or TIME step interval and press
[ENT] or move the ShuttlePoint knob to the right.
6. Move the ShuttlePoint knob up/down to the desired step value and press [ENT] or move
the ShuttlePoint knob to the right.
7. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.
10.0 TRACKING
You may have to take a few trips to see how you like the Distance or Time Interval setup
on the previous step. However when using the tracking feature you will notice every time
a Track Point is layed down on the Chart page a small filled in circle is shown on the Track
line. If you move the cursor over the top of the circle a popup window will be shown with the
Time, Water Temperature, Speed and Course Over Ground (COG). This is very useful if
you are fishing and want to review the conditions where the fish were being caught.