Sprint Nextel SPRINT PCS VISION SCP-2400 User Manual
Page 37
Section 2A: Your Phone – The Basics
21
Installing the Battery
To install the Li-Ion battery:
1.
Insert the battery into the opening on the back of the
phone and gently press down.
2.
Place the battery cover into the position as indicated in
the diagram, and then slide it until you hear it snap into
place.
Removing the Battery
WARNING: Do not handle a damaged or leaking Li-Ion battery as you
can be burned.
To remove your battery:
1.
Make sure the power is off so that you don’t lose any
stored numbers or messages. Press the battery release
latch, and then slide the battery cover and remove it.
2.
Use your thumbnail to lift and then remove the battery
as indicated in the diagram.
Phone Basics
SCP_2400 UG-P000_126.qxd 06.4.14 4:34 PM Page 21