beautypg.com

Optional 1000base-t module (smc6900gt), Optional stack module (smc6900s), Optional redundant power unit (smcrpu150w) – SMC Networks 100 User Manual

Page 23: Optional redundant power unit (smcrpu150w) -9

background image

A

BOUT

THE

T

IGER

S

WITCH

100

1-9

9/125 micron single-mode fiber cable. The 1000BASE-LX Gigabit
module operates at 1 Gbps, with support for auto-negotiation of
duplex mode and flow control.

Optional 1000BASE-T Module (SMC6900GT)

Figure 1-10. Single-Port 1000BASE-T Gigabit Module

SMC6900GT contains one 1000BASE-T RJ-45 port that can support
a link of up to 100 m (328 ft) using Category 5 or 5e twisted-pair
cable. The 1000BASE-T Gigabit module operates at 1 Gbps, 100
Mbps, and 10 Mbps with support for auto-negotiation of speed,
duplex mode and flow control.

Optional Stack Module (SMC6900S)

Figure 1-11. Stack Module

The uplink and downlink stack ports operate at 4.8 Gbps. These
modules can be used to connect up to four switches to the
backplane. A stack cable is included with each module.

Optional Redundant Power Unit (SMCRPU150W)

SMC provides an optional Redundant Power Unit (RPU),
SMCRPU150W, that can supply power to the switch in the event of
failure of the internal power supply.

SMC6900GT