Sanyo LC-2430 - Manual (Page 29)

1
Press and hold MEMORY until the display shows the
Memory Store screen and any stored name/number.
A beep sounds.
2
Press and
, or enter a two-digit number (01– 20)
to select the memory location you want to edit.
3
Press INTERCOM/SELECT.
The following screen appears with the memory location
number that you have selected in the display.
E25
4
Press to move the cursor down to the
Delete Memory command line.
5
Press INTERCOM/SELECT. The following
confirmation screen appears.
6
Press to move the cursor to Yes .
7
Press INTERCOM/SELECT or DELETE/SCAN.
There is a confirmation tone and the entry is
deleted. The following screen appears.
8
After a few seconds the display returns to the
Memory Store screen.
You may select another number to delete (return
to step 4) or press
MEMORY to return to standby.
Memory02 Deleted
Memory Store
01 SANYO
02 Alison McNab
Memory Store
01 SANYO
02 Alison McNab
Edit Memory02
Delete Memory02
Go Back
Edit Memory02
Delete Memory02
Go Back
Delete Memory02?
Yes
No
DELETE/SCAN
Memory Store
01 SANYO
02
DIRECTORY/
SPEED-DIAL
Erasing a stored name and phone number
CLT2430 5th 8/9 8/10/00 4:29 PM Page 29