Sanyo LC-2430 - Manual (Page 15)

Other Operations
When you want to: Do this:
Adjust the earpiece volume Press or during the call.
Temporarily switch to tone dialing Press . The subsequent numbers
(When the base is set to pulse mode) dialed will be sent as tone dialing.
Enter a pause in the dialing sequence Press REDIAL/PAUSE.
Improve reception Press DELETE/SCAN.
3
The number is dialed. The call time display
appears about 5 seconds after line connection.
4
To hang up, press TALK/END (or place the
handset on the base).
The call time display remains for about
5 seconds after disconnection.
E11
Dialing from standby mode
1
Enter the phone number. (Up to 32 digits.)
Example
: Enter 9057609944
2
Press TALK/END. Talk flashes in the display.
The volume setting is displayed. For example, if
the volume is set to high, the display shows:
9057609944
Talk
9057609944
Talk
Talk 0:00
9057609944
5:15
BASICS
• Press DELETE/SCAN if you enter a wrong number at step 1.
• Press and hold DELETE/SCAN to delete all numbers at once.
• You must press a key within 20 seconds or the phone will return to standby mode.
Notes:
Making a call
With the handset
CLT2430 5th 8/9 8/10/00 4:29 PM Page 15