Siemens A30853 User Manual

Page 32

Calls involving two or more parties

kap01.fm5

27.11.98

Profiset 30isdn engl.: A30853-X300-B107-1-7619

Ending a conference

You can disconnect one party or toggle between the two

parties. To terminate the conference completely, replace

the handset.

Ending a conference by disconnecting a party

Ending a conference and toggling between parties

Exiting from a conference

A conference is in progress.

h and 0 or 1

Press the Disconnect key and then “0“ or “1“.
Enter “0“ if you want to disconnect the party whose call

number is not shown on the display.
Enter “1“ if you want to disconnect the party whose call

number is shown on the display.

A conference is in progress.

Press the Conference key.
The conference is ended. The symbol K disappears on

the display.
You are back in the consultation call before the confer-

ence has been set up. You are connected to the first

party and the second party is put on hold.
You can now toggle between the two parties via the

Consultation key (➔ page 22).

During a conference, the call number of the

party added-on last is shown on the display, if is

known.
Call numbers are not displayed, for example,

in the case of incoming calls with number sup-

pression or calls from analog stations.

A conference is in progress.

Replace the handset.

Both parties are disconnected.

The conference is terminated.