Siemens A30853 User Manual

Page 21

Outgoing and incoming calls

kap01.fm5

27.11.98

Profiset 30isdn engl.: A30853-X300-B107-1-7619

Call waiting

You must apply to your local network operator for the

“Call waiting“ feature.

While you are conducting a call, a second incoming call is

signalled acoustically and visually. You can then accept or

reject this call without disconnecting the first caller.

Accepting call waiting

Rejecting call waiting

Deactivating the call signal (Do not disturb)

You can deactivate the call signal of your Profiset 30isdn

but nonetheless continue to make calls. The call will only

be shown on the display.

A call is in progress.

The call waiting signal is heard. The call number of the

second party is displayed, if it is transmitted.

You can accept the call via the Consultation key. You are

now connected to the second caller. The first call is auto-

matically put on hold. You can toggle between both calls

via the Consultation key (Switching between two calling

parties/toggling ➔ page 22).

Call waiting is not possible during a conference

or consultation.
The “Call waiting” function must be activated

(➔ page 38).

A call is in progress.

The call waiting signal is heard.

Reject the call via the Disconnect key. The second caller

receives the busy tone.

S21

Start the programming procedure.

0 or -

Enter or select the value “0“.

Save the setting.