Siemens A30853 - Manual (Page 11)

Putting the telephone into operation
3
kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619
Step 2: Connect the telephone
Handset cord (coiled)
Both ends of the handset cord have the same connector.
Insert the connector at the long end of the handset cord
into the socket labelled a on the underside of the de-
vice and insert the other connector into the handset be-
low the mouthpiece. In both cases, the connectors must
engage audibly. Feed the cable into the cable run.
Die Stecker müssen in beiden Fällen hörbar einrasten.
Telephone connecting cord
Both ends of the telephone connecting cord have the
same connector.
Insert one connector into the socket labelled A on the
underside of the device and insert the other connector
into your ISDN socket. In both cases, the connectors
must engage audibly. Feed the cable into the cable run.
Restricted powering switch
To ISDN socket
Handset cord (coiled)
Telephone connecting cord