Save the qfe.conf file – Sun Microsystems Sun Quad User Manual

Page 52

Sun Quad FastEthernet PCI Adapter Installation and User’s Guide • August 1997

In the third line in the previous example:

■

Name =

SUNW,qfe

■

Parent =

/pci@1f,2000/pci@2

■

Unit-address =

2,1

In the fourth line in the previous example:

■

Name =

SUNW,qfe

■

Parent =

/pci@1f,2000/pci@2

■

Unit-address =

3,1

2. Set the

ipg1

and

ipg2

parameters for the above four devices in the

/kernel/drv/qfe.conf

file.

3. Save the

qfe.conf

file.

4. Save and close all files and programs, and exit the windowing system.

5. Halt and reboot the system by typing the

init 6

command at the superuser

prompt.

name = “SUNW,qfe” parent = “/pci@1f,2000/pci@2” unit-address = “0,1” ipg1=20 ipg2=10;

name = “SUNW,qfe” parent = “/pci@1f,2000/pci@2” unit-address = “1,1” ipg1=20 ipg2=10;

name = “SUNW,qfe” parent = “/pci@1f,2000/pci@2” unit-address = “2,1” ipg1=20 ipg2=10;

name = “SUNW,qfe” parent = “/pci@1f,2000/pci@2” unit-address = “3,1” ipg1=20 ipg2=10;