Booting from the network, At the ok prompt type – Sun Microsystems Sun Quad User Manual

Page 28

Sun Quad FastEthernet PCI Adapter Installation and User’s Guide • August 1997

Booting From the Network

To use a Sun Quad FastEthernet PCI adapter ethernet interface as the boot device,
perform the following tasks:

1. At the

prompt type:

The

show-devs

command lists the system devices. You should see the full path

name of the

qfe

devices, similar to the example below:

Note –

You need to select only one of these

qfe

devices for booting.

2. At the

prompt type:

ok show-devs

/pci@1f,2000/pci@2/SUNW,qfe@0,1

/pci@1f,2000/pci@2/SUNW,qfe@1,1

/pci@1f,2000/pci@2/SUNW,qfe@2,1

/pci@1f,2000/pci@2/SUNW,qfe@3,1

ok boot

(full path name of the

qfe

device)