Sun Microsystems Sun Quad - Manual (Page 38)

24 Sun Quad FastEthernet PCI Adapter Installation and User’s Guide • August 1997
Driver Parameter Values and Definitions
This section describes the parameters and settings for the qfe device driver.
TABLE B-1 lists these parameters.
TABLE B-1 qfe Driver Parameter, Status, and Descriptions
Parameter Status Description
transceiver_inuse Read only Defines the current status
link_status Read only Defines the current status
link_speed Read only Defines the current status
link_mode Read only Defines the current status
ipg1 Read and write Inter-packet gap parameter
ipg2 Read and write Inter-packet gap parameter
use_int_xcvr Read and write Operational mode parameter
pace_size Read and write Operational mode parameter
adv_autoneg_cap Read and write Operational mode parameter
adv_100fdx_cap Read and write Operational mode parameter
adv_100hdx_cap Read and write Operational mode parameter
adv_10fdx_cap Read and write Operational mode parameter
adv_10hdx_cap Read and write Operational mode parameter
autoneg_cap Read only Local transceiver auto negotiation
capability
100fdx_cap Read only Local transceiver capability of
the hardware
100hdx_cap Read only Local transceiver capability of
the hardware
10fdx_cap Read only Local transceiver capability of
the hardware
10hdx_cap Read only Local transceiver capability of
the hardware
lp_autoneg_cap Read only Link partner auto negotiation capability
lp_100fdx_cap Read only Link partner capability
lp_100hdx_cap Read only Link partner capability