Sharp AJ-2000 - Manual (Page 53)

51
Troubleshooting
How to Use the
Online Manual
Printer Properties Print
Print Status
Window
Maintenance Troubleshooting Sharing Printer
Printer Inoperative
If the power lamp of the printer does not light up after being turned on, or all of the lamps keep blinking for a long
time, refer to the steps below.
CHECK1 Is the power cord connected?
Securely plug the power cord into the power connector
of the printer and the electrical outlet. The power cord
might not be inserted correctly. After firmly plugging
in the printer, verify whether or not the power lamp has
come on.
Reference: For details on connecting the printer to an
electrical outlet, see "CONNECTING THE
POWER CORD", in the Setup Guide and
Operation Manual.
CHECK2 Is the printer plugged into a working
electrical outlet?
Connect some other appliance to the electrical outlet to
verify whether the power source is supplying power.
If all the lamps keep blinking
If all the lamps including the power lamp, the ink lamp, and the
paper lamp are blinking, unplug the power cord from the
printer, and then plug it again. If your printer still does not work,
please call 1-800-BE-SHARP.