Changing ink tank (part 3) – Sharp AJ-2000 User Manual
Page 39
37
Maintenance
Changing Ink Tank (part 3)
5555
Close the front cover.
The carriage will return to its home position, and the ink will
be fed to the print head.
6666
Confirm the ink lamp is not blinking.
If the ink lamp continues to blink, open the front cover and
confirm that all the ink tanks are properly inserted.
7777
Print a test page to check if the unit prints properly.
Click the "Start" button of "Test print head" found in the
"Maintenance" dialog box of the print status window to print
out a test page.
If print quality is poor, return to step 4 and follow the
procedures once more.
Check this lamp.
If print quality is poor after correctly inserting the ink
tank,