Test print head – Sharp AJ-2000 User Manual
Page 40
38
Maintenance
Test Print Head
If you are not satisfied with the print quality, print a test page following the steps shown below.
1111
Make sure that Letter sized paper is set in the tray.
2222
Click the "Advanced" tab in the properties dialog
box, and then click "Maintenance" button.
3333
Click the "Start" button of "Test print head".
4444
Click the "OK" button.
A test page will be printed.
5555
Check the result of the test page.
If the print quality is poor, go to the next step.
6666
Click the "Start" button of "Auto head cleaning" to
clean the print heads.
If you cannot get a good result printing a test page even after
cleaning the print head five times, change the print head.
Reference:
7777
Change the print head.
Replace the black print head if white lines appear in the black
portion of your test page. If you find white lines in portions
of colors except black, replace the color print head.
Reference: