Settings, Sounds and alerts, Ring volume – Sony Ericsson Z600 User Manual
Page 92: Increasing ring, Ring signals, More ring signals, Vibrating alert, Alarm signal, Message alert, Personalising your phone settings
92
Settings
Settings
Personalising your phone settings.
Sounds and alerts
}
Settings
} Sounds and alerts
Customise signals such as ring signals and
different types of alerts.
Ring Volume
Select from 6 ringer volume levels.
Increasing ring
Select
On
when you wish the ring signal to rise
in steps from the lowest volume to the highest.
Ring signals
Select from the different ring signals. To
download a ring signal
More ring signals
Select this option to download ring signals
Vibrating alert
Set the vibrating alert to
On
/
Off
or
On if silent
.
Alarm signal
Select from the different alarm signals.
Message alert
Select from the different message alerts.
To turn the ring signal (except the alarm and timer)
on/off, press and hold
from standby mode or
press
More
and select
Turn on silent
/
Turn off silent
.
appears in standby mode to remind you when the
ringer is switched off.
If you subscribe to the Two Line Service, you
can set different ring signals for the two voice
lines.
Line 1
and
Line 2
are displayed instead of
Voice calls
. If your subscription includes the
Change Line Identification (CLI) service, you
can assign a personal ring signal to up to 10
callers (network dependent)
This is the Internet version of the user's guide. © Print only for private use.