Default priority, Time and cost, Call timers – Sony Ericsson Z600 User Manual
Page 63: Call costs
63
Calls
Default priority
}
Calls
} Default priority
Time and cost
}
Calls
} Time and cost
Call timers
Check the length of your last call, total calls
(incoming and outgoing) and outgoing calls.
Select
Reset timers
and
Total time
/
Outgoing time
to
reset the total/outgoing call time.
Turn
Minute minder
on to hear the beep every
minute during calls.
Call costs
Check the cost of your last call, total calls,
remaining credit and limited credit.
Setting credit and tariff
}
Calls
} Time and cost } Call costs } Set credit
to set a unit figure at which your phone will not
allow any more calls to be made. When the
amount reaches 0, no more calls can be made.
Enter your PIN2 at the prompt and set the
charge limit
}
Calls
} Time and cost } Call costs } Set tariff
to set the currency and price per unit which will
be used to calculate the call cost. Enter your
PIN2 at the prompt
You can request a certain priority when you
make a call, if your subscription supports the
call priority service. The priority levels are
defined by your network operator/service
provider and are normally within the rage of 0-4,
where 0 is the highest priority. Select this option
to receive available priority levels and then
select a priority level.
Track or control how long you are on the phone
and the cost of calls/data transmission made.
Call/GPRS costs can be used as a security
measure, for example, when you lend your
phone to someone, you must use your PIN2 as a
security code when you set or change the call
cost options.
This is the Internet version of the user's guide. © Print only for private use.