Sun Microsystems Ethernet Device Driver none - Manual (Page 25)

Parameter Definitions 17
3
If the link partner is not capable of auto-negotiation (when lp_autoneg_cap
is 0) the information described in Table 3-8 is not relevant and the parameter
value=0.
If the link partner is capable of auto-negotation (when lp_autoneg_cap
is 1) then the speed and mode information is displayed when you use
auto-negotiation and get the link partner capabilities.
lp_100hdx_cap 0
1 = No 100Mbit/sec half-duplex transmission
= 100Mbit/sec half-duplex
lp_10fdx_cap 0
1 = No 10Mbit/sec full-duplex transmission
= 10Mbit/sec full-duplex
lp_10hdx_cap 0
1 = No 10Mbit/sec half-duplex transmission
= 10Mbit/sec half-duplex
Table 3-8 Read-Only Link Partner Capabilities (Continued)
Parameter Values Description