Sun Microsystems Ethernet Device Driver none - Manual (Page 17)

9
Parameter Definitions 3
This chapter describes the parameters and settings for the hme device driver.
Driver Parameter Values and Definitions
The following sections describe the hme driver parameters, which are listed in
Table 3-1.
Table 3-1 hme Driver Parameter, Status, and Descriptions
Parameter Status Description
transceiver_inuse Read only Defines the current status
link_status Read only Defines the current status
link_speed Read only Defines the current status
link_mode Read only Defines the current status
ipg1 Read and write Inter-packet gap parameter
ipg2 Read and write Inter-packet gap parameter
use_int_xcvr Read and write Operational mode parameter
pace_size Read and write Operational mode parameter
adv_autoneg_cap Read and write Operational mode parameter
adv_100T4_cap Read and write Operational mode parameter
adv_100fdx_cap Read and write Operational mode parameter