Star Micronics LC-100+ - Manual (Page 51)

Automatic Sheet Feeder (SF-10DT) 43
❏
Fan a stack of paper and tap its edges to make sure they are all even.
❏
Insert the stack of paper into the Automatic Sheet Feeder.
The Automatic Sheet Feeder can hold up to 50 sheets of 20 lb paper, and will
not perform correctly if it is overloaded. Remove some paper if you seem to
be having problems.
❏
Adjust the right paper guide to match the width of the paper you are using.
The paper guides should be adjusted to keep the paper from moving
horizontally, while allowing it to slide up and down freely.
❏
Push the paper loading lever back to its original position.