Star Micronics LC-100+ - Manual (Page 45)

Automatic fanfold feeding 37
Automatic fanfold feeding
❏
See “Loading fanfold paper” on page 9 for details on using fanfold paper.
Manual sheet feeding
You can use the following procedure to manually feed single sheets of paper
into the printer.
❏
Make sure that there is no fanfold paper in the printer. If there is, use the
procedure under “Parking fanfold paper” on page 13 to park the fanfold
paper and prepare for manual sheet feeding.
❏
Set the release lever to the cut-sheet position.
❏
Reposition the paper guide so it is standing up and adjust the guides to
match the width of the paper.
Cut-sheet
Fanfold
LOAD