Star Micronics LC-100+ - Manual (Page 27)

Line feed 19
The printer is now in the Pitch Lock Mode. You could enter the Pitch Lock
Mode and Font Lock Mode (page 17) at the same time by holding down both
FONT and PITCH when you turn on printer power.
To exit the Pitch Lock Mode, simply turn the printer off.
Important!
Font and pitch lock will not function if you are using Windows Truetype fonts.
Line feed
❏
Make sure the printer is off-line ( ON LINE indicator is not lit).
❏
Press PAPER FEED once to feed paper one line. Holding down PAPER
FEED continually feeds paper, one line at a time, until you release the
button.
Paper eject (cut-sheet paper)
❏
Make sure the printer is off-line ( ON LINE indicator is not lit).
❏
While holding down PAPER FEED (which means the line feed operation
is being performed), press ON LINE and then release the two buttons.
The printer will automatically eject the sheet of paper that is in the printer.
Form feed (fanfold paper)
❏
Make sure the printer is off-line ( ON LINE indicator is not lit).
❏
While holding down PAPER FEED (which means the line feed operation
is being performed), press ON LINE and then release the two buttons.
The printer will automatically feed the paper to the top of the next page.
Parking fanfold paper
❏
Make sure the printer is off-line ( ON LINE indicator is not lit).
❏
While holding down the control panel’s FONT button, press the PAPER
FEED button.
❏
The printer automatically reverse feeds the fanfold paper until it is no
longer in contact with the platen.