Star Micronics LC-100+ - Manual (Page 33)

Selecting a bank 25
Selecting a bank
❏
While in the EDS Mode, use the control panel’s FONT button to select a
bank. When the DRAFT indicator flashes, the font and pitch indicators
show which bank is currently selected.
Selecting a switch
❏
While in the EDS Mode, use the control panel’s PITCH button to select a
bank switch. When the 10CPI indicator flashes, the font and pitch
indicators show which switch is currently selected.
Changing a switch setting
❏
After selecting a bank and switch, press the control panel’s PAPER FEED
button to turn the switch on and off. The current setting of the switch is
shown by the
ON LINE indicator: the indicator is lit when the switch is on,
and is not lit when the switch is off.
Lit Indicator Selected Bank
COURIER A
SANSERIF B
QUIET C
12CPI D
PROP E
COND F
Lit Indicator Selected Switch
COURIER 1
SANSERIF 2
QUIET 3
12CPI 4
PROP 5
COND 6