Star Micronics LC-100+ - Manual (Page 42)

34 Using the Printer with MS-DOS
If none of the printers listed above are available in the application, choose
one of the printers listed below. Once again, you should choose the printer
that is nearest to the top in the following list. For these printers, you should
use the EDS Mode or User Setup Utility to select IBM emulation (page 26).
* Does not support color printing.
❏
To print, follow the instructions given in the manual of the application you
are using. Typically, you would select the application’s
PRINT command,
make any necessary changes in the window that appears (such as the
number of copies to be printed), and then press the
Enter key to start
printing.
IBM Proprinter III*
IBM Proprinter II*
IBM Proprinter*