Sony PCS-1/1P - Manual (Page 92)

92
Selecting the Input Picture and Sound
While in communication you can switch the video input of the remote system by
selecting “Far” in the Video Input Select menu.
Main: Select the picture shot by the Camera.
Object: Select the picture from the optional PCS-DS150/DS150P Document
Stand.
AUX 1: Selects the picture from the equipment connected to the VIDEO IN
AUX 1 connector.
AUX 2: Select the picture from the equipment connected to the VIDEO IN
AUX 2 connector.
VCR: Select the picture input from the VCR connected to the system on the
remote site. This item does not appear unless the remote system is equipped
with the video input select function.
3
Press the PUSH ENTER button on the Remote Commander.
To change the video input name displayed in the Video Input Select menu
If you label “Main”, “Object”, “AUX1” or “AUX2” under “Custom Input
Label” in Page 4 of the General Setup menu as a desired name, the displayed
input name in the Video Input Select menu will be changed to the label when
selecting the video input in step 2 above.
For example, you can label as Main, Document, Camera2, None.
For details on “Custom Input Label”, see “Page 4/4” in the General Setup
menu on page 49.
Note
Video Input Select
Near
Main
Far
Main