Sony PCS-1/1P - Manual (Page 158)

158
Preparing for a multipoint videoconference
3
Select the line interface icon or a still image to be displayed in the Phone
Book.
The icon is shown as “ LAN”, “ ISDN” or “ LAN & ISDN”.
4
Set up the line interface of the remote parties.
When “ LAN” is selected
Enter the IP addresses of all the parties in the A to E text boxes.
When “ ISDN” is selected
Enter the telephone numbers of all the parties in the A to E text boxes.
To register a normal phone, enter the telephone number with “T” at the
beginning. (e.g., T0312345678)
When “ LAN&ISDN” is selected
Select the interface (LAN or ISDN) used from the drop-down list on the right
of the A to E text boxes, then enter the IP addresses for the LAN connection
and the telephone numbers for the ISDN connection for all the parties to be
connected for a multipoint conference.
For details on the setups, see step 5 in “Registering a New Remote Party”
on page 60.
5
Press the V or v button to select “Save”, then press the PUSH ENTER
button.
The registration of the multipoint connection list is completed.
To specify a remote party registered in the Phone Book to the multipoint
connection list
1
Use the V, v, B or b button on the Remote Commander to select the name
you want to register in the multipoint connection list.
Index MULTILIST2
List Edit
Save Cancel
LAN&ISDN
Line I/F
LAN
ISDN
A
B
C
D
E
LAN
LAN
LAN
LAN
LAN