Sony PCS-1/1P - Manual (Page 163)

163
Starting a Multipoint Videoconference
C
h
apt
er
8:
M
u
lti
p
o
in
t Vi
d
eoc
onf
e
re
n
ce
The system begins dialing the number of the remote party with the marks.
“ Dialing (LAN)”, “ Dialing (ISDN)” or “ Dialing (LAN &
ISDN)”appears on the monitor screen, and the ON LINE indicator (blue) on
the Communication Terminal blinks.
When the system connects to all the parties, the message “Meeting starts!”
appears on the screen, and the ON LINE indicator stops blinking and lights.
To call remote parties not registered in the Phone Book
Basic operations are the same as those for starting a point-to-point conference.
For details, see “To call a remote party not registered in the Phone Book” on
page 71.
1
Select “Dial” in the launcher menu to open the Dial menu.
2
Select the line interface you are using for multipoint connection under
“Line I/F”.
Select “ LAN” to use LAN connection, “ ISDN” to use ISDN line
connection, and “ LAN & ISDN” to use LAN and ISDN connections .
3
Set up the line interface of the remote parties.
When “ LAN” is selected
Enter the IP addresses of all the parties in the A to E text boxes.
When “ ISDN” is selected
Enter the telephone numbers of all the parties in the A to E text boxes.
To register a normal phone, enter the telephone number with “T” at the
beginning. (e.g., T0312345678)
When “ LAN&ISDN” is selected
Select the interface (LAN or ISDN) used from the drop-down list on the right
of the A to E text boxes, then enter the IP addresses for the LAN connection
More Options
IP Line I/F
Dial
A2 A2
B1 B1
B2 B2
1024 Kbps
Dial Save
ISDN
ISDN
LAN
LAN&ISDN
ISDN (2B)
ISDN (Telephone)
LAN