Sony PCS-1/1P - Manual (Page 52)

52
Registering Local Information
Page 6/7
Shows the A1 to C2 text boxes for inputting
the telephone numbers and the Auto SPID
tab.
SPID
This item is used only for customers in the
USA and Canada.
For details, see “SPID Setting for
Customers in the USA and Canada”.
Auto SPID
This item is used only for customers in the
USA and Canada.
For details, see “SPID Setting for
Customers in the USA and Canada”.
• The D1-F2 text boxes are shown on the next
page (Page 7). Fill in the boxes depending on
the lines you connect.
• The SPID menu does not appear depending
on the protocol you selected on Page 1.
If you connect to an ISDN switch type,
configuration of SPID (Service Profile
Identifier) is required. When you select
“Auto SPID” in the ISDN Setup Wizard (see
page 31), the “Area Code”, “Local Number”
and “SPID” setup items are automatically
set.
If “Auto SPID” is not available in your area,
set up SPID manually using the ISDN Setup
menu.
1
Open the ISDN Setup menu.
2
Enter the country code in the Country/
Region Code text box depending on
the network switch type you are using.
AT&T 5ESS (National ISDN), NTI
DMS-100 (National ISDN): Enter
“1”.
AT&T 5ESS (Multipoint Custom
ISDN): Enter “1*10”.
AT&T 5ESS (Point-to-Point Custom
ISDN): Enter “1*12”.
NTI DMS-100 (Custom ISDN): Enter
“1*11”.
3
Open Page 2 of the ISDN Setup menu
to enter the LDN (Local Directory
Number) in the Local Number text
boxes.
When you use the AT&T 5ESS
(Multipoint Custom ISDN) or AT&T
5ESS (Point-to-Point Custom ISDN)
switch type
Notes
Page: 6/7
ISDN Setup
Save Cancel
A2
A1
SPID
Auto SPID
B1
B2
C1
C2
SPID Setting for Customers in
the USA and Canada
ISDN
Page: 1/7
USA
ISDN Setup
Country/Region
1 Country/Region Code
National ISDN Protocol
Save Cancel