Star Micronics LC-8521 - Manual (Page 76)

68 Optional Accessory
Removing the push tractor unit from the back of the printer
❏
Make sure that the printer is unplugged from its AC power source.
❏
Open the cover where the push tractor unit is located.
If the push tractor unit is located in the back of the printer, open the back
cover. If it is located in the front of the printer, open the document table.
In either case, opening the cover as far as it will go will cause it to lock in
place.
❏
Pressing down on the two releases on the left and right of the tractor feeder,
lift it up and away from the printer.
❏
Close the cover of the printer.
[Back of the printer]
[Front of the printer]