Siemens SPARC ENTERPRISE M8000 - Manual (Page 37)

Information about Software 29
Identifying Degraded Memory in a
System
1. Log in to XSCF.
2. Type the following command:
The following example identifies DIMM number 00A on CMU#3 has degraded
memory..
Identifying Different Memory Sizes in a
System Board
To identify if the domain contains system boards with different memory sizes, you
can use either of the following commands to display the list of memory sizes:
■ showdevices (8) command on the XSCF
■ prtdiag (1M) command on the domain
Using the showdevices Command
1. Log in to XSCF.
XSCF> showstatus
XSCF> showstatus
CMU#3 Status:Normal;
* MEM#00A Status:Degraded;