Solaris os patch information, Patches for sparc64 vi processors, Patches for sparc64 vii processors – Siemens SPARC ENTERPRISE M8000 User Manual
Page 10
2
SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1072 • September 2008
Note – By using the Solaris 10 8/07 installation DVD, you cannot boot the domain
mounted with the SPARC64 VII processors. When you newly install Solaris OS to a
domain mounted with the SPARC64 VII processors, use the Solaris 10 5/08
installation DVD to install Solaris 10 5/08.
For XCP, you can download the latest files of firmware at the following websites.
Global Site:
http://www.fujitsu.com/sparcenterprise/firmware/
Japanese Site:
http://primeserver.fujitsu.com/sparcenterprise/download/firmware/
Solaris OS Patch Information
This section lists mandatory patches for the SPARC Enterprise M8000/M9000
servers.
Patches for SPARC64 VI Processors
These patches are required for servers running Solaris 10 11/06.
■
118833-36 (Install 118833-36 before 125100-04.)
■
125100-04 or later
■
120068-03 or later
■
123839-07 or later
■
125424-01 or later
■
125075-01 or later
■
125670-02 or later
The patches are not required for servers running Solaris 10 8/07 OS or later.
Patches for SPARC64 VII Processors
These patches are required for servers running Solaris 10 8/07 and mounting
SPARC64 VII processors.
Note – Apply the patches in the following order. For the procedures of CPU
upgrade including the patches, see
.