Ike/ipsec configuration – Siemens 5890 User Manual
Page 85
SIEMENS 5890 DSL Router
User’s Guide
Chapter 6 Security Setup
IKE/IPSec Configuration
SIEMENS
79
IKE/IPSec Configuration
IPSec (Internet Protocol Security) is an open standard that defines optional authentication and encryption
methods at the IP packet level. IPSec can only handle IP packets.
IPsec is especially useful for implementing Virtual Private Networks and for remote user access through dial-
up connections to private networks. IPSec is a true network layer protocol that provides authentication, privacy,
and data integrity. IPSec must be supported at both ends of the connection.
IPSec does not require modification of individual applications or devices for secure data transport. Because it
does require global IP addresses for all peers, Network Address Translation (NAT) can be used with IPSec.
To configure IKE/IPSec:
1. Click IKE/IPSec Configuration from the left navigation pane of the Router Information window. This
displays the IKE/IPSec Information page.
2. Select one of the following from the left navigation pane:
Perform basic IKE/IPSec setup.
Perform advanced IKE/IPSec setup.