beautypg.com

Siemens 5890 User Manual

Page 68

background image

SIEMENS 5890 DSL Router
User’s Guide

Chapter 6 Security Setup

NAT

SIEMENS

62

NAT

Network Address Translation (NAT) provides a level of security by hiding the private IP addresses of your LAN
behind the single public IP address of your router. All connections pass through the router and are translated
by NAT. Network addresses on inbound traffic are translated from public to private IP addresses; while
addresses on outbound traffic are translated from private IP addresses to the router’s public IP address.
Besides translating addresses, NAT also authenticates a request or matches it to a previous request.

Network administrators create a NAT table that does the global-to-local and local-to-global IP address
mapping. To confiugre NAT:

1. Click NAT on the left navigation pane of the Router Information page. This displays the NAT Configuration

page.

2. In the NAT Passthrough section of this page, select Enable or Disable to specify whether or not multiple

VPN clients are allowed. Enabled, multiple VPN clients are allowed; disabled, only a single VPN client is
allowed.

3. In the Outbound NAT Setting section of this page, select Enable or Disable to enable or disable NAT for

communications from your LAN to the Wide Area Network (WAN).

4. Click Apply.

5. Do both of the following:

Configure the WAN side for NAT support by clicking

NAT Server

from the left navigation pane.

Configure the Local Machine for NAT support by clicking

NAT Host Mapping

from the left navigation

pane.