SUPER MICRO Computer 5015M-U - Manual (Page 131)

E-1
Appendix E: System Specifi cations
Appendix E
System Specifi cations
Processors
Single 775-pin Intel ® Xeon® 3000 Series, Pentium® D, Pentium Extreme Edition,
Pentium 4, and Celeron D processors at a FSB speed of 1066/667/533 MHz
Note: Please refer to our web site for a complete listing of supported processors.
Chipset
Intel 3010 chipset
BIOS
8 Mb Phoenix® Flash ROM
Memory Capacity
Four 240-pin DIMM sockets supporting up to 8 GB of unbuffered ECC/non-ECC
DDR2-667/533/400 SDRAM (interleaved or non-interleaved)
See the memory section in Chapter 5 for details.
SATA Controller
Intel ICH7R on-chip controller for Serial ATA (RAID 0, 1 5 and 10 supported)
SATA Drive Bays
Four (4) hot-swap drive bays to house four (4) SATA drives
Peripheral Drive Bays
One (1) slim DVD-ROM drive
Expansion Slots (provided with included riser cards)
5015M-UR/5015M-U
Right side: one PCI-E x4 card
Left side: a UIO card and one PCI-E x8 card
5015M-NTR/5015M-NT:
Right side: one PCI-E x4 card
Left side: two PCI-E x8 cards. (See section 5-6 for details.)