Samsung ML-331X - Manual (Page 152)

Wireless network setup
49 2. Using a network-connected machine
• After completing the wireless network connection, you
need to install a machine driver to print from an
application (See "Installing driver over the network" on
page 17).
• See your network administrator, or the person that set up
your wireless network, for information about your
network configuration.
Items to prepare
• Access point
• Network-connected computer
• Software CD that was provided with your machine
• The machine installed with a wireless network interface
• Network cable
Printing a network configuration report
You can identify the network settings of your machine by printing a
network configuration report.
See "Printing a network configuration report" on page 13.
IP setting using SetIP Program (Windows)
This program is used to manually set the network IP address of your
machine using its MAC address to communicate with the machine.
The MAC address is the hardware serial number of the network
interface and can be found in the Network Configuration Report.
See "Setting IP address" on page 13.
Configuring the machine’s wireless network
Before starting you will need to know the network name (SSID) of
your wireless network and the network key if it is encrypted. This
information was set when the access point (or wireless router) was
installed. If you do not know about your wireless environment,
please ask the person who set up your network.
To configure wireless parameters, you can use SyncThru™ Web
Service.
Using SyncThru™ Web Service
Before starting wireless parameter configuration, check the cable
connection status.