LBI-38965
26
USER ACTION: Remove Installation Diskette 2. Insert Installation Diskette 3. Press the Enter key.
Floppy disk has been mounted.
Scanning floppy disk for BCU/CAL installation files...
Copying BC_B.SX to 01.02/loads/BC_B.SX... * Done! 169977 bytes copied.
Floppy disk has been unmounted.
USER ATTENTION REQUIRED.
Remove the current installation floppy diskette.
Insert the next installation disk (if any).
Strike to continue.
USER ACTION: Remove Installation Diskette 3. Insert Installation Diskette 4. Press the Enter key.
Floppy disk has been mounted.
Scanning floppy disk for BCU/CAL installation files...
Copying IP.DAT to 01.02/cnfg/IP.DAT... Done! 915 bytes copied.
Copying ROUTES.DAT to 01.02/cnfg/ROUTES.DAT... Done! 2237 bytes copied.
Copying EXPORTS.DAT to 01.02/cnfg/EXPORTS.DAT... Done! 1736 bytes copied.
Copying CAL.DAT to 01.02/cnfg/CAL.DAT... Done! 4427 bytes copied.
Floppy disk has been unmounted.
USER ATTENTION REQUIRED.
Remove the current installation floppy diskette.
Insert the next installation disk (if any).
Strike to continue.
USER ACTION: Remove Installation Diskette 4. Press the Enter key.
Processing file 01.02/cnfg/IP.DAT.
Setting IP address: 147.117.37.226 (0x937525E2)
Assigning host name: bcu01
Setting subnet mask: 0xFFFFF000
Loading file 01.02/loads/BC_A.SX from the hard disk...*
First load complete. 393126 bytes loaded.
Loading file 01.02/loads/BC_B.SX from the hard disk... *
Second load complete. 55692 bytes loaded.
Application load complete. 448818 bytes loaded.
Hard disk has been unmounted.
Transferring program control to BCU/CAL...
System startup: Wed May 4 13:54:47 1994
Beginning boot of fv5310 WanServer board...
WanServer boot complete.
Initializing memory and global objects...
Beginning application installation...
Checking system directories.
Created default LOG directory path: 01.02/log
Created default CDR directory path: 01.02/cdr
Created default RAR directory path: 01.02/rar
Checking system configuration files.
Creating default system file: 01.02/cnfg/SYSTEM.BIN...
Creating default unit parameters file: 01.02/cnfg/UNIT.BIN...
Creating default group parameters file: 01.02/cnfg/GROUP.BIN...
Checking product feature license.
Application installation complete.
