Sharp ER-A520 - Manual (Page 221)

219
Removing the journal paper roll
1.
Remove the printer cover.
2.
Press the Ô key to advance the journal paper until its
printed part is out of the way.
3.
Cut the paper and remove the take-up spool.
4.
Cut the paper behind the printer and near the paper roll.
5.
Press the Ô key until the paper remaining in the printer
comes out completely.
6.
Remove the paper roll from the back of the printer.
Do not pull the paper through the printer.
7.
Remove the outer side of the take-up spool as shown on the
left.
8.
Remove the printed journal roll from the take-up spool.
Note
Area to cut