Sharp ER-A520 - Manual (Page 123)

121
Age limitation
(Dynamic UPC file)
If an item sold is not allowed to be sold to certain aged persons by law, program the age limitation for the
corresponding PLU/UPC.
For each PLU/UPC
For a range of PLUs
• PLU codes must have already been defined. If not, an error message "NO RECORD" will appear
on the display.
• When a PLU/UPC for which a setting other than zero (1 to 99) has been programmed as the age
limitation is entered, the birthday entry will be enforced.
Programming the age limitation “18” for PLU 2
For each PLU/UPC
Age limitation
2280 . @
2 @ 18 t
Ç
Print Key operation
Example
Note
2236
. @
@ @ t Ç
End PLU code
(max. 5 digits)
Age limitation
(0 - 99, 0: no limitation)
To apply the current
setting of start PLU code
to PLUs within the range
Start PLU code
(max. 5 digits)
2280
2081
. @ @ t Ç
PLU code
(max. 5 digits)
Age limitation
(1 - 99)
To program any PLU/UPC
To program zero (for no limitation)
To program for the following PLU/UPC
Ä
UPC code
(6 to 13 digits)
Procedure
2081 2236 2280 PGM 2