Sharp ELECTRONIC ORGANIZER OZ-290HII User Manual

Page 26

Positioning the unit

Close the cover, and insert the unit into the carrying case as shown in
the illustration, then make sure that the top flap is fastened.

Secure the carrying case clip to your belt or to the top of your shorts or
pants.
The unit must be attached in vertical position to the ground in order to
count steps correctly.

• Make sure that the holder’s clip is secured firmly in place. If worn

improperly, the unit may be detached or may result in incorrect
measurements.

• The belt clip is designed to hold the unit while walking. The clip may

not hold the unit or may break if it is exposed to a high-impact
condition such as running, or playing basketball.

The unit may not count steps correctly if you:
• Walk at an irregular pace, or in a crowded place.
• Shuffle legs excessively.
• Wear sandals when walking.
• Vary your movement (play sports, for example).
• Move up/down excessively.
• Are in a vehicle with vertical and horizontal motions.
• Attach the unit improperly (tilted, for example).

Pedometer Mode

Set the pedometer to ON/OFF. To count steps, set it to ON.
Tap

CLOCK

, tap

, and select “PEDOMETER SET” in the MENU

mode, then press

ENTER

, use k or m to select “ON”, then press

ENTER

and start walking. To turn off the pedometer, select “OFF”.

Viewing the step count and calorie values

1. Tap the

DIET

once, twice, or three times to enter the Diet Function

Mode.

2. Select “PEDOMETER” using k or

m, and press

ENTER

twice to

display the interim report of
calories burned and total step
count.
Tap

C•CE

to return to the

previous screen.
• Step count of the day will be registered automatically when the

time is at “11:59:59PM”.

• This unit calculates the calorie consumption with the following

formula*:
Calorie consumption [Kcal] = (step

× stride [inch] Ч 2.54 Ч 0.001 +

3.5)

Ч weight [lb] Ч 0.45359237 Ч 0.005

150.

STEP

I E Kc a l

CALOR

–2006

3–2 1

80. 2 1

Clip

OZ-290HII(En).pm65

05.2.2, 3:54 PM