Sanyo VPC-C1 - Manual (Page 64)

61
English
OTHER SHOOTING FUNCTIONS
3
Take the picture.
For video clip recording, see page 47.
For still image shooting, see page 48.
e To return to normal photography, select k from the flash menu, and
press the SET button.
Using the zoom
Your camera has two zoom functions: optical zoom and digital zoom.
1
Point the camera lens at the
subject.
2
Press [T] or [W] on the zoom switch
to compose the desired image.
[T]: Zoom in on the subject.
[W]: Zoom out.
e When the zoom switch is pressed,
the zoom bar appears on the LCD
monitor.
e When the optical zoom factor is at
maximum, zooming stops
temporarily. When [T] on the zoom
switch is pressed again, the mode
changes to the digital zoom mode
and zooming continues (if digital
zooming is enabled).
3
Take the picture.
For video clip recording, see page 47.
For still image shooting, see page 48.
Zoom switch
LCD monitor
When both optical
and digital zoom
are enabled
Pointer
Zoom bar
Optical zoom
Digital zoom (Yellow)
When optical zoom
only is enabled
5:':A5CP[QDQQM TVR ''''և'''' ߆ ''ވ''