Sanyo VPC-C1 - Manual (Page 38)

35
English
INSTALLING THE BATTERY PACK AND CARD
The card can be used after it has been formatted with the camera (page 122).
Make sure that the battery pack polarity (+ and –) and the card orientation are
correct.
Install the battery pack
1
Open the battery cover on the side.
e Open the battery cover by lightly
pressing it and sliding it towards
the rear.
2
Insert the battery pack.
e Firmly push it all the way in.
e Match the [ I ] mark on the battery
with the [ I ] mark on the camera.
e
Raise the battery pack and pull it
out.
5:':A5CP[QDQQM TVR ''''և'''' ߆ ''ވ''