Install the card – Sanyo VPC-C1 User Manual
Page 39

English
36
3
Close the battery cover.
e
Match the [
I
] marks, and slide the
cover towards the front to close it.
e
At the time of purchase the battery
pack is not charged. Be sure to
install a fully charged battery pack
in the camera (page 34).
Install the card
1
Open the card cover on the bottom
of the camera.
2
Insert the card.
e
Firmly insert the card until it clicks
into place.
e
To remove the card, press it down,
and then release. The card will
protrude slightly, and you can then
pull it out.
3
Close the card cover.
CAUTION
e
Do not attempt to forcefully remove the card.
5:':A5CP[QDQQM TVR ''''և'''' ߆
''ވ''
This manual is related to the following products: