Sanyo VPC-C1 - Manual (Page 117)

English
114
DATE AND TIME SETTING
The camera will record the date and time an image or audio recording is taken
so that you can display them during playback. Therefore, before capturing
images, make sure the correct date and time are set.
Example: To set the clock to 7:30 p.m. on December 23, 2003
1
Display the Option Setting Screen
(page 105).
2
Select the clock set icon C , and
press the SET button.
e The Clock Set Screen appears.
e
The current date and time settings
are shown.
e Follow the procedures below to
enable or disable the date display
during playback, to set the display
format for the date, and to set the
date and time.
e
To return to the Option Setting
Screen, press the MENU button, or
select “EXIT” and press the SET
button.
CLOCK SET
2003/10/01
00:00
Y/M/D
DATE
TIME
DISP
EXIT
5:':A5CP[QDQQM TVR ''''և'''' ߆ ''ވ''