Motorola V2088 - Manual (Page 65)

Using the Options Menu 59
Show Charge Per Call, Show Total Call Charges
A These menu items are only available if you receive the Advice of Charge service.
These options are used to display the call charges meter during and after chargeable calls. The
meter shows phone units or currency depending on the setting of the ‘Set Charge Type’ option.
No In-Call Display
This option switches off in-call display of the charge/time meter.
Call Charge Settings
This feature allows you to customise your Advice of Charge settings. You will be prompted to
enter your PIN2 security code before you can access the options.
A This menu item is only available if you receive the Advice of Charge service.
Reset Call Charges
This option resets your charge meters to zero.
Set Total Charge Limit
This option sets the maximum limit for call charges; once this limit has been reached, the
network will refuse any further chargeable calls.
If you switch the charge limit
On , you will be prompted to enter a new limit. Enter the amount as
either units or currency depending on the setting of the Set Charge Type option. Units
must be entered as whole numbers.
A When the charge limit is On, you will not be able to make fax or data calls.
Once a limit is set, the in-call display will show the remaining credit. When you reach your last
two minutes, the warning message
Approaching Charge Limit will be displayed and a
warning alert will sound. The sound will be repeated when one minute remains. When the limit
is reached the message
Charge Limit Reached will be displayed and you will not be able
to make any more chargeable calls.
Once the limit is reached the Total Charge Limit will need to be reset or switched off before any
chargeable calls can be made.
Select
Off to switch off the charge limit.
Set Charge Type
This option defines whether charge information is displayed as either phone units or currency.
Units
Sets the charge type to phone units.
Currency
Sets the charge type to currency. You will be prompted to enter the Currency Name . Enter a
3-character notation, for example GBP for the UK, DEM for Germany or FFR for France. You will
then be prompted for the
Charge Per Unit . Enter the amount and press O .
Lifetime Timer
This option is used to display the total time of all calls made on your phone.
This meter can not be reset, the
Reset All Timers , Master Reset or Master
Clear options have no effect.
(A5) 06_pg31_60 opt_menu.fm Page 59 Wednesday, August 18, 1999 5:42 PM