Motorola V2088 - Manual (Page 57)

Using the Options Menu 51
Unblocking Your Phone
If you receive the Blocked message you will need to enter an unblock code and key sequence
before you can use the phone.
A The 8 digit PIN unblocking code will have been provided with your SIM card by your
Cellular Service Provider.
Enter the following key sequence to unblock your phone:
<<05< E O F O F O .
The new PIN code must contain four to eight digits.
! If this operation is performed incorrectly 10 times in a row, your SIM card will
become permanently blocked.
Change SIM PIN2 Code
This option is used to change your PIN2 security code.
When you select this option you must enter the old PIN2 security code before you can proceed.
You will be asked to enter a new, four to eight digit code to replace the old PIN2 security code.
The new PIN2 security code must be entered again as confirmation.
! If the PIN2 security code is entered incorrectly three times in a row, the
Blocked message will be displayed.
When the Blocked message is displayed, you are not allowed access to menu items that
require you to enter the PIN2 code, for example ‘Setup Fixed Dialling’ and ‘Call Charge Settings’.
If you receive the
Blocked message when you try to enter your PIN2 code, you will need to
unblock and change the code using the following key sequence:
<<052< E O J O J O
A The 8-digit unblocking code will have been provided with your SIM card by your
Cellular Service Provider.
! If the PIN2 unblocking operation is performed incorrectly 10 times in a row,
your PIN2 code will become permanently blocked.
j New Security Code
The security code is used to control access to security and other options within the menus.
This option is used to change the security code, which is set at manufacture to 000000.
Once selected, you will be asked to enter the current security code before you can proceed.
You will then be asked to enter a new, six digit code to replace the old security code.
A In order to safeguard your phone, you should change your security code from the
factory setting as soon as possible.
j Extended Menus
i Press and hold $ . Extended Menus will be temporarily activated until you exit the
Options menu.
This option is used to switch the extended menus on or off.
If the extended menu option is switched off, you will not be able to access any of the extended
features.
The option has two settings,
On or Off .
(A5) 06_pg31_60 opt_menu.fm Page 51 Wednesday, August 18, 1999 5:42 PM