Motorola ST 7760 - Manual (Page 47)

Using Memory
47
Placing a Calling Card Call
Once you’ve stored your calling card information, just recall the
information and place the call whenever you want to use your
calling card. Before your phone begins dialing, it will prompt
you for the number you want to call. Once you’ve entered the
number, your phone will automatically insert the number in
place of the Number Character you stored.
1. Recall
Entry Press
‰
then enter the location number
where your calling card sequence is stored.
2. Enter
Number Press
æ
. You will see: Enter Number.
Enter the phone number you are calling. You
may enter the number manually or recall it by
location.
3. Place
Call Press & hold
a a a a
to place the call. Your phone
will dial the number to access your long dis-
tance provider, then wait for your input when
it reaches the first pause.
4. Send
More
Numbers Press
a a a a
or press
æ
to send the next group
of numbers when the recording prompts you.
The phone will automatically insert the num-
ber to call at the appropriate spot in the
sequence. Press
a a a a
to send each set of num-
bers until finished.
5. End
Call Press
º
, close the flip, or press & hold
a a a a
until you hear a high tone, then press
a a a a
again
to end the call.