Standard Horizon MATRIX GX3000S - Manual (Page 77)

Page 77 GX3000S
[6(NAV)] Key
When in radio mode, this key is used to directly select channel digit “6” in
a channel number.
Secondary use
Press the [F] key first then press the [6(NAV)] key, the LCD will display
NAV GPS Data, Time, SOG (Speed Over Ground), and COG (Course
Over Ground) when a GPS is connected to the accessory cable of the
GX3000S. See section “8.3 ACCESSORY CABLE” for details.
[7(SCRM)] Key
When in radio mode, this key is used to directly select channel digit “7” in
a channel number.
[8(PA)] Key
When in radio mode, this key is used to directly select channel digit “8” in
a channel number.
[9(FOG)] Key
When in radio mode, this key is used to directly select channel digit “9” in
a channel number.
[0] Key
When in radio mode, this key is used to directly select channel digit “0” in
a channel number.
Secondary use
Used to select A (alpha channels). Press the desired channel keys then
press and hold [0] key until “A” appears next to the channel number and
press [ENT] to select the channel.
[CLR] Key
Press the [CLR] key to cancel the menu selection and/or keypad entry.
[ENT] Key
Press the [ENT] key to enter the menu selection and/or keypad entry.